• 450Mbps wireless transmission rate brings smooth wireless N experience
• Supports multiple operating modes: Access Point, Range Extender, Multi-SSID and Client modes
• Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
• Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector

Description

TP-Link TL-WA901N 450Mbps Wireless N Access Point

The TP-LINK Wireless N Access Point TL-WA901N is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet-enabled device such as a game console, digital media adapter, printer, or network-attached storage device to a wireless network.

The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or any other application that you may wish to use.

Wireless N Speed & Range

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology. It simultaneously works through three antennas with smart antenna technology to Tx and Rx. To overcome the interference and signal degradation when travelling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building.

Above all, you could easily pick up the network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes and Easy to Build WLAN

Supports Client, Multi-SSID, Range Extender, and AP operation modes to enable various wireless applications. To give users a more dynamic and comprehensive experience when using your AP. Multiple operating modes also help you easily build a wireless network for hard-to-wire locations or eliminate wireless dead zone.

Passive PoE Supported and More Flexible Deployment

The TL-WA901N is able to be powered using an Ethernet cable to simultaneously send data. Electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible. Such as on the wall or on the ceiling of your office.

Features:

• 450Mbps wireless transmission rate brings a smooth wireless N experience
• Supports multiple operating modes: Access Point, Range Extender, Multi-SSID and Client modes
• Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
• Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector

TP-Link TL-WA901N 450Mbps Wireless N Access Point

Specifications:

HARDWARE FEATURES

Interface: One 10/100M Ethernet Port (RJ45) / Support Passive PoE

Button: WPS/Reset, Power On/Off

Power Consumption: 5.8W

External Power Supply: 12VDC/1A

Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

Dimensions ( W x D x H ): 7.67*5.12*1.43 in.( 194.82*129.93*36.2mm)

Antenna Type: 3*5dBi Detachable Omni Directional (RP-SMA)

WIRELESS FEATURES

Frequency: 2.4-2.4835GHz

Signal Rate:

• 11n: Up to 450Mbps(dynamic)
• 11g: Up to 54Mbps(dynamic)
• 11b: Up to 11Mbps(dynamic)

Reception Sensitivity:

• 270M: -68dBm@10% PER
• 130M: -68dBm@10% PER
• 108M: -68dBm@10% PER
• 54M: -68dBm@10% PER
• 11M: -85dBm@8% PER
• 6M: -88dBm@10% PER
• 1M: -90dBm@8% PER

Transmit Power: <20dBm(EIRP)

Wireless Modes: Access Point /Repeater (Range Extender)/ Bridge with AP/ Client/Multi-SSID

Wireless Functions:

• Enable/Disable Wireless Radio;
• WMM (Wi-Fi Multimedia)
• Wireless MAC Address Filtering
• Wireless Statistic
• Domain Login Function

Wireless Security: 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK

DHCP: DHCP Server

Quality of Service: WMM

Management: SNMP

Advanced Functions: Up to 30 meters PoE is supported

OTHERS

Certification: CE, FCC, RoHS

Package Contents:

• Wireless Access Point TL-WA901ND
• 3 Detachable Omni Directional Antennas
• Power Supply Unit
• Passive PoE Power Injector
• Resource CD
• Quick Installation Guide
• RJ-45 Ethernet Cable

System Requirements: Microsoft Windows XP, Vista, Windows 7, 8, 10

Environment:

• Operating Temperature: 0℃~40℃ (32℉~104℉)
• Storage Temperature: -40℃~70℃ (-40℉~158℉)
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing