Ubiquiti NanoBeam 5AC Gen2 - NBE-5AC-Gen2

Ubiquiti NanoBeam 5AC Gen2 - NBE-5AC-Gen2

The Ubiquiti NanoBeam AC Gen2 is an airMAX CPE (Customer Premises Equipment) which is ideal for CPE deployments requiring maximum performance from the smallest possible footprint.

Ubiquiti NanoBeam AC Gen2 Key Features

• Frequency 5 Ghz
• Throughput 450+ Mbps
• Range 15+ km
• Improved Wide Bandwidth Antenna
• Dedicated Wi-Fi Radio for Management
• airMAX ac Processor for Superior Performance

Improved Noise Immunity
The Ubiquiti NanoBeam AC Gen2 directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam AC Gen2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design
The radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam AC Gen2 gets maximum gain out of the smallest footprint. Providing high performance and an innovative form factor, the NanoBeam AC Gen2 is versatile and cost effective to deploy.

General

• Dimensions 358 x 271.95 x 272.5 mm (14.09 x 10.71 x 10.73")
• Weight 
  Without Mount 800 g (1.76 lb)
  With Mount 980 g (2.16 lb)
• Power Supply 24V, 0.3A Gigabit PoE Adapter (Included)
• Max. Power Consumption 7W
• Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
• Supported Voltage Range 24V ± 10%
• Operating Frequency 
  Worldwide
  2412 - 2462 MHz
  5150 - 5875 MHz
  USA: U-NII-1 
  5150 - 5250 MHz 
  USA: U-NII-2A
  5250 - 5350 MHz 
  USA: U-NII-2C
  5470 - 5725 MHz 
  USA: U-NII-3
  5725 - 5850 MHz
• Gain 23 dBi
• Networking Interface (1) 10/100/1000 Ethernet Port
• Processor Specs MIPS 74Kc
• Memory 64 MB DDR2
• LEDs Power, Ethernet
• Channel Sizes PtP Mode PtMP Mode
  10/20/30/40/50/60/80 MHz 10/20/30/40 MHz
• Enclosure Characteristics Reflector (SGCC 0.6T) / Plastic: PC
• Mounting Pole-Mounting Kit (Included)
• Wind Loading 275 N @ 200 km/h (61.8 lbf @ 125 mph)
• Wind Survivability 200 km/h (125 mph)
• ESD/EMP Protection ± 24 kV Contact / Air
• Operating Temperature -40 to 70° C (-40 to 158° F)
• Operating Humidity 5 to 95% Noncondensing
• Certifications CE, FCC, IC